TP-LINK AV500 TL-WPA4230P KIT User Manual
Product codes
TL-WPA4230P KIT
TL-WPA4230P
AV500 Passthrough Powerline WiFi Extender
22
3.5 Powerline
There are two submenus under the Powerline menu: Network Settings and Station Settings. Click
any of them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.
any of them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.
Figure 3-18 Powerline menu
3.5.1 Network Settings
Selecting Powerline > Network Settings, and you can configure the network name of the powerline
extender or all the stations in current network on this page.
extender or all the stations in current network on this page.
Figure 3-19 Network Settings
MAC Address - The physical address of the powerline extender, as seen from the powerline. The
value can not be changed.
value can not be changed.
Device Password - The password of the powerline extender. The value can not be changed.
Network Name - Enter the network name (factory default - HomePlugAV).
Click the Default button to enter the default network name.
Click the Set Local button to set the powerline extender.
Click the Set All button to set all stations which entered the correct passwords in current network,
including the powerline extender.
including the powerline extender.
Note:
If you set all stations network name, the remote ones which power off or entered the wrong password
will not take effect.
will not take effect.
3.5.2 Station Settings
The Station Settings page shows remote stations in current network and allows you to enter, modify or
delete the password and name for each station.
delete the password and name for each station.