Janitza Prodata 2 5224001 Data Sheet

30

The ProData 2 features 15 digital inputs, which are 
subdivided into three groups of 5 inputs:

•  The status of each of the inputs is shown by 

the corresponding LED. The corresponding 
LED illuminates green if there is a signal on this 
interface. 

•  The GridVis software can be used to assign a 

name, unit and description to each digital input.

•  The states of the digital inputs are each located on 

their own Modbus address.

•  The last 16 switches (events) are logged with a 

time stamp for each digital input.

•  Digital inputs 1-10 can be configured as functional 

inputs. Operating these inputs as pulse counters is 
not possible in this configuration.

•  A tariff selection can be assigned to each digital 

input where only the highest activated tariff runs.

Specific functions can be assigned to digital inputs 1 - 10. 
In this function mode, operating these inputs as pulse 
counters is not possible.

Digital input 1 to 8:
Configuration as tariff converter

Digital input 9:
Synchronisation of the internal clock; choosing between 
minute or hour synchronisation is possible. However, 
synchronisation is also possible via a Modbus address.

Digital input 10:
Reset for the synchronisation values (see notes). 
You also have the option of resetting the mean values via 
a Modbus address.