Carson 1:8 RC model car Nitro Buggy 500204029 User Manual

•  Raise the tyres off the ground

•  Turn the steering wheel to the right and left as far as it will go. The 

wheels are to follow the steering direction.

•  If the wheels operate in the opposite direction, operate the servo 

Reverse switch (ST in position REV).

•  To regulate the driving speed, actuate the throttle/brake

 

- backwards (forward driving, accelerating) or
- forwards (braking, reversing).

•  Power switch is on the radio box.

•  Fix the receiver antenna and wire (see page 73).

•  Put the body on and fix it with the body split pins.

Pull the transmitter antenna out completely.

The range of the remote control is reduced if the antenna is not 
pulled out completely. 

CAUTION!
Always turn the transmitter´s power switch ON first!