Sygonix Surveillance Camera 20815Q 20815Q User Manual

25

Here the iris shutter settings of the objective are switched between “AUTO” (automatic) and
„MANUAL“ (basic setting „MANUAL“).
After selecting “AUTO”, you can push the button to call a submenu by performing additional set-
tings.
“TYPE” 

 Lens type switches between “DC“ and “VIDEO”

   

 

 

The basic setting „DC“ must not be changed. The setting  „VIDEO“ is not 
supported by this camera because a DC lens is fi rmly installed.

“MODE” 

 Selecting the shutter opening

   

 

“AUTO”: 

Automatic 

setting of the camera (basic setting)

   

 

“OPEN”: 

Shutter 

open

   

 

“CLOSE”: 

Shutter 

closed

“SPEED” 

 Set the speed for the shutter depending on the light situation

The camera is equipped with a DC lens. Preferably leave the setting at “AUTO” so that the closure 
speed can be selected automatically depending on the ambience light.
A submenu is called with the button if “AUTO” (automatic) or “MANUAL” is selected.
Setting “AUTO”
At great ambience brightness (“HIGH LUMINANCE”):
“MODE” 

 „AUTO IRIS“: The shutter must be set to a fi xed value and only the iris shutter 
is controlled automatically.

     

 „SHUT+AUTO IRIS“: Both the shutter and the iris shutter are controlled auto-
matically.

     

 

„SHUT“: The shutter is controlled automatically. Observe that this dis-
play appears only if „LENS“ hs been selected in the setting menu and 
„MANUAL“ as operating mode.  

“BRIGHTNESS” Setting the brightness
At low ambience brightness (“LOW LUMINANCE”):
“MODE” 

“AGC/OFF”: Automatic amplifi cation control on/off

“BRIGHTNESS” 

Selection of the amplifi er factor (x0.25, x0.50, x0.75, x1.00)

Setting “MANUAL”
“MODE” 

“SHUT+AGC” (Cannot be changed)

“SHUTTER” 

Shutter speed 1/50....1/10000

“AGC” 

Correction value for amplifi cation control