Conrad 393904 time 393904 Data Sheet

Operation of the button at the input „SET“ toggles the relay output and the sequence output („OFF“ <-> „ON“).



The function is NOT started with the input „SET“ but is activated by transferring the function on the multifunction transmitter!

The function starts with activated relay output and deactivated sequence output.

First operation of the button at the input „SET“ => relay output deactivated, sequence output activated.

Second operation of the button at the input „SET“ => relay output activated, sequence output deactivated, etc.

Only when a button is pushed at the input „RESET“ both outputs will be deactivated.

After a reset, the function is re-started if the button at the input „SET“ is pushed (starting with activated relay outputs).

Operation of the button at the input „SET“ toggles the condition of the relay outputs in the order „Relay on“ -> „Sequence on“ -> „Completely off“
(starting with activated relay output).

First operation of the button at the input „SET“ => relay output activated, sequence output deactivated.

Second operation of the button at the input „SET“ => relay output deactivated, sequence output activated.

Third operation of the button at the input „SET“ => relay and sequence output are deactivated, etc.

When a button is pushed at the input „RESET“ both outputs will be deactivated. After a reset, the function is re-started if the button at the input
„SET“ is pushed (starting with activated relay outputs).

SET

RESET

RELAIS

SEQUENZ

RELAIS

SEQUENZ

RESET

SET