Kaiser Nienhaus Radio-controlled code keypad 350600 N/A 350600 User Manual

Depending on the radio code location, press the 

key button 1x, 2x or 3x.

enter the valid access code (for access code following ex-factory delivery or a 

reset see Chapter 4/Fig. 4), otherwise your own respectively valid access code.

press the 

key button.

If the entry is valid, a long light signal is emitted. If the entry is invalid, 3 short 

light signals are emitted.

enter the new 4-digit access code via the 

numerical keys.

press the 

key button.

If the entry is valid, a long light signal is emitted.

enter the new 4-digit access code again. 

press the 

key button.

If your entry is valid, a long light signal is emitted and the entered or changed 

access code becomes effective immediately. 

A radio code which has been assigned a memory location number is retained even 

after the corresponding access code has been changed!

Before entering a valid or suitable access code, any number of numerical keys can 

be pressed, so that on entering the access code in the company of another person, 

there is no risk of that person being able to take note of your code. only the last 4 

numerical keys pressed before the “key” button is pressed, are used to compare the 

entered code with the memorized access code.

every permitted press of a key is acknowledged by a short light signal; this also 

enables you to monitor whether the key was actually pressed. Furthermore, when 

two keys are pressed in succession, the time between pressing the first key and the 

second may not exceed 15 seconds; otherwise a long light signal is emitted and 

you can/must then start afresh. 

In this way (simply wait for a long light signal) any action initiated incorrectly or by 

mistake can be terminated and you can then start again.

an invalid or incorrect entry is always indicated by three short light signals, after 

which the unit completely deactivates itself for 10 seconds and you then have to 

wait for a long light signal before starting the action again. 

enter the valid access code using the 

numerical keys.

press the 

key button.

If the entry is valid, a long light signal is emitted and the corresponding radio 

code is transmitted (light signal flashes rapidly). 

14

TR20A004-C / 08.2009