Intel E3815 FH8065301567411 Data Sheet

Product codes
FH8065301567411
Page of 5308
 
MIPI-Camera Serial Interface (CSI) and ISP
Intel
®
 Atom™ Processor E3800 Product Family
Datasheet
1041
Maximum primary camera on-the-fly still image resolution for primary camera is 16 
Mpixel at 18 fps.
Higher resolution, or higher frame rates are supported as long as the product of 
resolution and frame rate does not exceed 288 Mpixels/s (= 16 Mpixels * 18 fps).
Maximum primary camera on-the-fly stereoscopic still image resolution for primary 
camera is 8 Mpixel for each of the left and right images at 18 fps. The number of 
Mpixels can be increased by decreasing the frame rate.
15.2.4
Burst Mode Support
The SoC supports capturing multiple images back to back at maximum sensor 
resolution. At least 5 images must be captured in burst mode. The maximum number 
of images that can be so captured is limited only by available system memory. These 
images need not be processed on-the-fly.
15.2.5
Continuous Mode Capture 
SoC supports capturing images and saving them to DRAM in a ring of frame buffers 
continuously at maximum sensor resolution. These images must then be fetched and 
processed on-the-fly by the ISP. This adds a round trip to memory for every frame and 
increases the bandwidth requirements.
15.2.6
Secondary Camera Still Image Resolution
Maximum secondary camera still image resolution is 4 Mpixel at 15 fps.
15.2.7
Primary Camera Video Resolution
Maximum primary camera video resolution is 1080p60.
Maximum primary camera dual video resolution is 1080p30.
Maximum stereo resolution is 1080p30.
15.2.8
Secondary Camera Video Resolution
Maximum secondary camera video resolution is 1080p30.
15.2.9
Bit Depth
Capable of processing 14-bit images at the stated performance levels.
Capable of processing 18-bit images at half the performance levels, i.e. process on-
the-fly 16 Mpixel 18-bit images at 7 fps instead of 15 fps.
Capable of processing up to 18-bit precision.