Bunn Single SH DBC* (with Smart Funnel) Owner's Manual

Page 26

This function allows the setting or modification 

of the funnel locks to stay engaged after the end of 

a brew cycle. This ensures that the funnel cannot be 

removed until after the liquid has emptied out of the 

funnel.

OFF to 10 minutes for all three batch 

sizes.

NOTE:  If the brewer is already in the DRIP TIMES 

screen, it is not necessary to follow steps 1 through 

10 in this section, but proceed directly to step 11.

1.  Press and hold the ® pad until the display reads 

SET NEW RECIPES. Release the ® pad. Press the 

® until the display reads REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read NO NAME, along with MODIFY, SHOW and 

3.  Press and release NEXT to advance to the desired 

coffee name to be modified.

4.  Press and release MODIFY. The display should 

read BREW OZ. 

5.  Press and release DONE. The display should read 

3 BATCHES DONE?.

6.  Press and release YES. The display should now 

read % BYPASS. 

7.  Press and release DONE. The display should read 

3 BATCHES DONE?.

8.  Press and release YES. The display should now 

read SET PULSE BREW. 

9.  Press and release NO. The display should now 

read SET PREINFUSION. 

10.  Press and release NO. The display should now read 

DRIP TIME, along with either the word OFF, or a 

time will be showing. A batch light should also be 

blinking.

11. Using the (-) and (+), set the amount of time from 

when the brew solenoid shuts off to when drip-out 

occurs for that batch size.

NOTE: Set to OFF to prevent funnel locks from engag-

ing (to disable this function), for a particular batch 

size. To set to OFF, press and release (-) until OFF is 

displayed.

P2447

REVIEW RECIPES?

NO                     YES

3 BATCHES DONE?

NO                     YES

DRIP TIME  X:XX

(-)        DONE        (+)

NO-NAME

MODIFYSHOWNEXT

EXIT TO

NEXT FUNCTION

SCREEN

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED

IN THE BREWER'S MEMORY

WHEN THE LAST COFFEE NAME

IN THE BREWER'S MEMORY IS

DISPLAYED, PRESSING NEXT

WILL EXIT AND THE DISPLAY

WILL THEN READ:

EXITS TO THE NEXT COFFEE NAME

IN THE BREWER'S MEMORY. IF NO

OTHER COFFEE NAMES ARE

ENTERED IN THE BREWER'S

MEMORY, THE DISPLAY WILL READ:

(COFFEE NAME)

MODIFYSHOWNEXT

(COFFEE NAME)

SETUP COMPLETE

THAT WAS THE

LAST RECIPE

PRESS

DONE

YES

DONE

YES

NO

NO

SCREEN DISPLAYED

BREW OZ: XX.XX

3 BATCHES DONE?

% BYPASS XX.X

3 BATCHES DONE?

SET PULSE BREW?

SET PREINFUSION?

12.  When finished, press another batch size and repeat 

step 11 until all three batches are set. 

13. When finished, press DONE. The display should 

read 3 BATCHES DONE?

14. If the three batch sizes are set correctly, press YES. 

The screen should show the name of the coffee 

flavor being programmed (modified) along with 

SETUP COMPLETE.

15. After a 5 second delay, the display will advance to 

the next coffee name in the brewer's memory. If 

no other coffee names are present, the display will 

read THAT WAS THE LAST RECIPE, and return to 

the REVIEW RECIPES screen.

34025  022509