Bunn Single SH DBC* (with Smart Funnel) Owner's Manual

Page 28

BYPASS OZ/M:  XX.X

(-)         DONE         (+)

1.  Press and hold the ® pad until the display reads SET 

NEW RECIPES. Release the ®. Press and release 

the ® pad until the display reads BYPASS OZ/M. 

The number represents what the brewer thinks 

is the flow rate of the bypass valve in ounces per 

minute.

2.  If the actual flow rate of the bypass valve is known, 

but is different than the number on the display, use 

the (-) and (+) pads to enter the correct flow rate 

in ounces per minute.

3.  When finished,  press and release the DONE  pad.   

This saves the new setting and advances to the 

next function screen, CALIBRATE FLOW. Another 

alternative is to press the 

 pad located on the 

front switch panel to exit the BYPASS OZ/M func-

tion and return to the MAIN SCREEN.

P2306

XXX    REFILL     XXX

(-)         DONE         (+)

SPRAY OZ/M:  XX.X

(-)         DONE         (+)

NOTE: Make sure the water in the tank is touching 

the refill probe.

1.  Press and hold the ® until the display reads SET 

NEW RECIPES. Release the ®.  Press and release 

the ® pad until the display reads REFILL and shows 

a number on both sides of the word.

2.  To adjust the threshold setting, press (-) to de-

crease, or (+) to increase the setting.

NOTE: Always make sure that the number on the right 

is larger than the number on the left when water is in 

contact with the refill probe in the tank.

3.  When finished, press and release DONE. This 

saves the new setting and advances to the next 

function screen, SPRAY OZ/M. Another alterna-

tive is to press the  

 pad located on the front 

switch panel to exit REFILL and return to the MAIN 

 

This function allows the operator to view or to enter 

the actual flow rate coming out of the sprayhead. This 

is NOT used to change the actual flow rate, but to tell 

the internal controller how fast the water is flowing. 

The unit of measure is ounces per minute. (Oz/M)

1.  Press and hold the ® pad until the display reads 

P2304

P2305

  This function allows the operator to adjust the 

sensitivity of the refill circuit. This is mainly a trouble-

shooting feature. Water in different geographical loca-

tions can have different conductivities. By adjusting 

the sensitivity of the refill circuit, this will allow the 

brewer to operate under various water conditions.

SET NEW RECIPES. Release the ®.  Press and 

release the ® pad until the display reads SPRAY 

OZ/M. The number represents what the brewer 

thinks is the flow rate of the sprayhead valve in 

ounces per minute.

2.  If the actual flow rate of the sprayhead valve is 

known, but is different than the number on the 

display, use the (-) and (+) pads to enter the cor-

rect flow rate in ounces per minute.

3.  When finished, press and release DONE.  This saves 

the new setting and advances to the next function 

screen, BYPASS OZ/M. Another alternative is to 

press the   

 pad located on the switch panel to 

exit SPRAY OZ/M function and return to the MAIN 

 

This function allows the operator to view or to enter 

the actual flow rate coming out of the bypass nozzle.  

This is NOT used to change the actual flow rate, but to 

tell the internal controller how fast the water is flowing. 

The unit of measure is ounces per minute.

34025  022509