Behringer Digital Mixer X32 Manual

music-group.com

behringer.com

3

can be assigned to sending control changes, program changes or notes

parameters are currently ‘Channel’ and ‘Value’

for CC and Note commands ‘Value’ 0…127 = controller number/note number, and the button 
momentarily toggles the controller value/note-on velocity 

to 127 (depressed/released]

for Program Changes ‘Value’ 0…127 = program/preset number, that will be sent upon 
pressing the button

can be assigned to sending control changes or notes

parameters are currently ‘Channel’ and ‘Value’

for CC and Note commands ‘Value’ 0…127 = controller number/note number, and the button 
toggles the controller value/note-on velocity

between value/velocity 127 and 0 with every operation

The ASSIGN section also refl ects/displays reception of the same MIDI commands that are selected 
for transmission

The MIDI commands assigned to the ASSIGN controls can be transferred to and from stage via 
AES50 using the S16 stage box MIDI I/O

Enables a specifi c form of bi-directional MIDI communication for remote controlling a 
computer DAW application using control elements of the X32 console. REMOTE can be used in 
3 modes, Mackie Control, HUI and raw MIDI CC (raw) controllers (see Setup/remote)

MIDI CC (raw) selected and Remote is enabled+active, the group section controls will transmit/
receive the following messages:

Group 1-8 SELECT

1

Note 64-71

on (127) / off  (0), push non-latching

Group 1-8 SOLO

1 

CC 32-39

on (127) / off  (0), toggle latching

Group 1-8 MUTE

1

CC 40-47

on (127) / off  (0), toggle latching

Sends On Fader

1

CC 48

on (127) / off  (0), toggle latching

Group DCA 1-8

1

Note 72

on (127) / off  (0), push non-latching