Behringer Digital Mixer X32 Manual

music-group.com

behringer.com

4

BUS 1-8

1

Note 73

on (127) / off  (0), push non-latching

BUS 9-16

1

Note 74

on (127) / off  (0), push non-latching

MTX 1-6

1

Note 75

on (127) / off  (0), push non-latching

GROUP Faders

1

CC0-7

0-127

HUI selected and Remote is enabled+active, then the group fader section and buttons will emulate the 
HUI control surface protocol, i.e. for ProTools.

SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW, in banks of 
8 tracks

Sends On Fader = enables touch-writing a fader automation on selected track, track automation 
mode in DAW must be ‘touch’, (latching)

use the layer buttons to determine the function assigned to the MUTE 1-8 buttons, the LED 
displays indicate that function

–

Group DCA 1-8 = allows to move the bank selection of tracks in a DAW, (push non-latching)

–

BUS 1-8 = allows to set DAW tracks to ‘Record Ready’, (push non-latching)

–

BUS 9-16 = enables using the MUTE buttons for track mute in the DAW, (latching)

–

MTX 1-6 = enables using the MUTE buttons for transport controls in the DAW, (latching)

MACKIE CTRL selected and Remote is enabled+active, then the group fader section and buttons will 
emulate the Mackie Control Universal protocol

SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW, in banks of 
8 tracks

Sends On Fader = enables touch-writing a fader automation on selected track, track automation 
mode in DAW must be ‘touch’ or ‘latch’, (latching)

use the layer buttons to determine the function assigned to the MUTE 1-8 buttons, the LED 
displays indicate that function

–

Group DCA 1-8 = allows to move the bank selection of tracks in a DAW, (push non-latching)

–

BUS 1-8 = allows to set DAW tracks to ‘Record Ready’, (push non-latching)

–

BUS 9-16 = enables using the MUTE buttons for track mute in the DAW, (latching)

–

MTX 1-6 = enables using the MUTE buttons for transport controls in the DAW, (latching)