Siemens Welding System ST PCS 7 User Manual
Communication
Industrial Ethernet
Passive network components:
ITP cables and connectors
9/25
Siemens ST PCS 7 · November 2007
9
■
Overview
Electrical transmission media
Terminals can be connected through industrial twisted pairs
(ITPs). The preassembled
ITP standard cable
with Sub-D con-
nectors is available for connection between stations and network
components. Line lengths of up to 100 m can be achieved while
saving on patch technology.
The
The
ITP standard cable 9/15
is equipped with a 9-pin and a
15-pin connector. The cable is used for direct connection of ter-
minals with ITP interface to Industrial Ethernet components with
ITP interface.
The
The
ITP XP standard cable 9/9
is equipped with two 9-pin con-
nectors. This cable is crossed for direct connection of two Indus-
trial Ethernet network components with ITP interface.
The
The
ITP XP standard cable 15/15
is equipped with two 15-pin
connectors. This cable is crossed for direct connection of two
terminals with ITP interface.
The Industrial Ethernet
The Industrial Ethernet
ITP connectors
have Sub-D connectors
made of metal and are available in two versions:
• 9-pin plug with straight cable outlet, for connection to
• 9-pin plug with straight cable outlet, for connection to
OSM/ESM, OLM or ELM
• 15-pin plug with variable cable outlet, for connection to termi-
nals with ITP interface
Alternatively, the terminals can also be connected to twisted pair
(TP cord) cables. Detailed information on TP cord cables can be
found in the IK PI catalog, in the A&D Mall or in CA 01 at "Com-
munication/Networks / SIMATIC NET communication systems".
■
Selection and Ordering Data
Order No.
ITP Standard Cable for
Industrial Ethernet
Industrial Ethernet
Not preassembled, cut-to-length
2 x 2-core, without connectors
For connection of a terminal; for
self-assembly of connectors or for
the connection between patch
panel and socket
6XV1 850-0AH10
ITP Standard Cable 9/15
ITP installation cable for direct
connection of terminals with ITP
interface to Industrial Ethernet
network components with ITP
interface;
with a 9-pin and a 15-pin Sub-D
plug
• 2 m
• 2 m
6XV1 850-0BH20
• 5 m
6XV1 850-0BH50
• 8 m
6XV1 850-0BH80
• 12 m
6XV1 850-0BN12
• 15 m
6XV1 850-0BN15
• 20 m
6XV1 850-0BN20
• 30 m
6XV1 850-0BN30
• 40 m
6XV1 850-0BN40
• 50 m
6XV1 850-0BN50
• 60 m
6XV1 850-0BN60
• 70 m
6XV1 850-0BN70
• 80 m
6XV1 850-0BN80
• 90 m
6XV1 850-0BN88
• 100 m
6XV1 850-0BT10
ITP XP Standard Cable 9/9
Crossed ITP installation cable for
direct connection of two Industrial
Ethernet network components
with ITP interface;
with two 9-pin Sub-D plugs
• 2 m
• 2 m
6XV1 850-0CH20
• 5 m
6XV1 850-0CH50
• 8 m
6XV1 850-0CH80
• 12 m
6XV1 850-0CN12
• 15 m
6XV1 850-0CN15
• 20 m
6XV1 850-0CN20
• 30 m
6XV1 850-0CN30
• 40 m
6XV1 850-0CN40
ITP XP Standard Cable 15/15
Crossed ITP installation cable for
direct connection of two terminals
with ITP interface;
with two 15-pin sub-D plugs
• 2 m
• 2 m
6XV1 850-0DH20
• 6 m
6XV1 850-0DH60
• 10 m
6XV1 850-0DN10
ITP Connector for Industrial
Ethernet
Ethernet
• 9-pin, for connection to
OSM/ESM, OLM or ELM
6GK1 901-0CA00-0AA0
• 15-pin, for connection to
terminals with ITP interface
6GK1 901-0CA01-0AA0
© Siemens AG 2007