Kraftware Corporation EMC DS-16M2 User Manual
4
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
Switch Mounting Kit (DS-16M or DS-32M)
Tools Required for Installation
You will need to have the following tools available to complete the
installation of the rails and switch(es).
installation of the rails and switch(es).
◆
# 1 Phillips head screwdriver
◆
1/4-in. nut driver
◆
5/16-in. nut driver
#10 washers
ball studs
ball studs
1 washer and 1 ball stud per rail to hold
bezel (2)
39U bezel only
bezel (2)
39U bezel only
Latch brackets and keyplate spacers
2 each to secure 1U bezel for 16M
switch in 40U cabinets
switch in 40U cabinets
Left and right latch brackets
1 left and 1 right to secure 2U bezel for
32M switch in 40U cabinet
32M switch in 40U cabinet
1U or 2U, low-profile or standard-profile bezel (front rack panel)
1 per switch
Two 7-foot USA power cords, straight C13 to N5-15P straight
Two 6-foot IEC power cords, straight C13 to C14 straight
Two 6-foot IEC power cords, straight C13 to C14 straight
2 per switch
(use the ones appropriate for your PDU)
(use the ones appropriate for your PDU)
Component
Use