Kraftware Corporation EMC DS-16M2 User Manual

EMC Departmental Switches DS-16M2 and DS-32M2  Installation Guide

There are two different length rails: The short rails range between 
20.5 inches to 27 inches. The long rails range from 27 inches to 34 
inches. Each kit contains two different length rear rail mounts. Use 
the rail length that is appropriate for your rack/cabinet.

The front and rear flanges of the DS-16M rails have three screw holes. 
See the figure below.

If you are installing both a DS-16M2 and DS-32M2 switch, the DS-16M2 
should be positioned at the top of the rack/cabinet, located above the 
DS-32M2 switch.

Select the appropriate length rails, and follow the steps below to 
install them.

Front

Rear

Rear

Front