Kraftware Corporation EMC DS-16M2 User Manual
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
7
Installing the DS-16M and DS-32M Rails
1. Assemble the rails.
The rails assembly consists of an adjustable rail, a C channel, and
two washers and kep nuts. See the figure below.
two washers and kep nuts. See the figure below.
a. Insert the threaded posts on the C channel into the slot on the
adjustable rail.
b. Secure the adjustable rail to the C channel with two #10 flat
washers and M5 kep nuts. Leave the nuts finger tight.
2. Determine where in the rack/cabinet you are going to locate the
switch.
The left/right orientation of the rails is determined by the
location of the word “top” on the C channel. The rail is oriented
correctly when this word “top” is up and toward the rack/cabinet
front. See the next figure.
location of the word “top” on the C channel. The rail is oriented
correctly when this word “top” is up and toward the rack/cabinet
front. See the next figure.
C channel
Adjustable
rail
rail
Attach washers\nuts
to threaded posts
to threaded posts