Emerson SS-100 User Manual
2 • SS-100 HALComm and UltraSite Wiring Layouts
ed)
• DB-25/DB-9 female/female null modem cable (not
provided)
• Static IP Address
Requirements for Computers Connecting to SS-
100:
• IBM PC running Windows 9x/NT/XP/2000 set up
on an IP network
• EzWebCon Installed (download from www.lan-
• UltraSite version 3.30 or higher (if using UltraSite)
2.1.
SS-100 HALComm and UltraSite Wiring Layouts
SS-100 Direct to HALComm Steps
1.
Connect 25-pin female end of DB-25 null modem
adapter to the 25-pin male port of the SS-100.
adapter to the 25-pin male port of the SS-100.
2.
Connect 25-pin female end of DB-25/DB-9 STC
adapter to the 25-pin male end of the DB-25 null
modem adapter.
adapter to the 25-pin male end of the DB-25 null
modem adapter.
3.
Connect female end of the 10’ serial cable to the
male end of DB-25/DB-9 STC adapter.
male end of DB-25/DB-9 STC adapter.
4.
Connect DB-9 female/female STC gender
changer to the male end of the 10’ serial cable.
changer to the male end of the 10’ serial cable.
5.
Connect the other end of the DB-9 female/female
STC gender changer to the male 9-pin Modem
port of the HALComm.
STC gender changer to the male 9-pin Modem
port of the HALComm.
6.
Use a standard ethernet cable to attach the SS-
100 to an active hub of your TCP/IP network.
100 to an active hub of your TCP/IP network.
Wiring Layout with HALComm
NOTE: Using a DB-25/DB-9 female/female
null modem cable (not provided) to connect
the SS-100 to the Modem port on the HAL-
null modem cable (not provided) to connect
the SS-100 to the Modem port on the HAL-
Comm controller will eliminate steps 2-6.
NOTE: Screws on the DB25 null modem
adapter may need to be reversed for a correct
connection with the DB25/DB9 STC adapter.
adapter may need to be reversed for a correct
connection with the DB25/DB9 STC adapter.