Lynx L36ASRLP Owner's Manual

lp connections

make sure the lp cylinder

valve is fully closed.

cylinder

it is

possible for the valve to be

valve is fully closed.

open without releasing gas

possible for the valve to be

but, as soon as you start con-

open without releasing gas

necting the regulator, gas will

leak from the connection.

necting the regulator, gas will

insert the regulator inlet into

the cylinder valve and turn the

black coupler clockwise until

the coupler is hand tight.

black coupler clockwise until

not over-tighten this connec-

the coupler is hand tight.

tion.
To disconnect the coupler, first

make sure the main cylinder

To disconnect the coupler, first

valve is turned off.

make sure the main cylinder

grasp

the coupler and turn counter

rasp

clockwise.

the coupler and turn counter

the inlet will then

the coupler and turn counter

disengage.
always leak-test the connec-

tion after refilling or exchang

lways leak-test the connec-

ing lp cylinders.

(see indeX:

“leak test” for further details.)

gas lIne purgIng

you should pur

ge the gas line

of air before attempting to

ou should pur

ou should purge the gas line

ge the gas line

light the grill.

of air before attempting to

make sure all grill controls

are in the “off” position.
slowly turn on the main

gas supply.
push in the rotisserie knob

and confirm that the igniter

is glowing. it is furthest

and confirm that the igniter

from the fuel source and

is glowing.

will completely purge the

lines.

will completely purge the

it will take several

will completely purge the

seconds for the burner to

light.
hold the knob on for

about 20 seconds to allow

the air in the system to

purge and the burner to

light

purge and the burner to

wait at least 5 minutes

after shutting off the

after shutting of

control before attempting

after shutting of

to light the burners.

control before attempting

FINAL CHECKS

leaK testIng

leak test

procedure:

create a soapy solution

of 1 part soap and 3 parts

reate a soapy solution

water.
Confirm that all control

knobs are in the off

position.
tur

tt n on the fuel supply. for

natural gas, turn the valve

n on the fuel supply.

handle 1/4 turn to align

with the gas flow.

handle 1/4 turn to align

for l.p., tur

n the cylinder

valve knob counter

clockwise one full rotation.
apply the soap solution

generously by paint brush

pply the soap solution

or squirt bottle on all con

generously by paint brush

nections and fittings.

or squirt bottle on all con

if bubbles appear to

“grow” on any of the con-

f bubbles appear to

nections, you have a gas

leak. immediately turn off

nections, you have a gas

immediately

the gas supply.

fixing a gas leak

shut off the gas supply
tur

tt n all grill controls to the

“on” position to purge

the grill of any gas build-

” position to purge

up, then turn the controls

back “

up, then turn the controls

off

up, then turn the controls

”.

Danger!

To prevent fire or explosion

hazard, DO NOT smoke or

To prevent fire or explosion

allow any potential source

of ignition (sparks, electri

allow any potential source

cal arcing, etc) in the area

of ignition (sparks, electri

while performing a leak

cal arcing, etc) in the area

test. Leak tests should be

while performing a leak

conducted outdoors only.

Never conduct a leak test

using fire or flame.

wash off the soapy solution

with cold water and dry.

off the soapy solution

tighten the loose joint, or

replace the faulty part with

ighten the loose joint, or

manufacturer-recommend-

eplace the faulty part with

ed replacement parts.
do not attempt to repair

the l.p. cylinder valve if it is

attempt to repair

damaged. the only way to

safely resolve a damaged

damaged.

damaged. he only way to

he only way to

cylinder is to Replace it.

Repeat the leak test to

ensure that no leaks are

Repeat the leak test to

present.

loW Heat burner

adjustment

for maIn brass burn-

ers, prosear™ and sIde

burners only!

do not adjust tHe ro-

tIsserIe burner.

the main brass burners and

side burners on your lynx

grill featur

side burners on your

e an adjustable low

setting.
fluctuations in gas pressure,

gas conversion and even in

luctuations in gas pressure,

the quality of the gas itself

gas conversion and even in

may affect burner perfor-

the quality of the gas itself

mance at the “

may affect burner perfor-

low

may affect burner perfor-

” setting.

it could be either too high or

too low.

to adjust the bur

ner low

setting:

o adjust the bur

make sure the grill is cool.
Remove racks and

briquette trays so that you

can see the flames while

briquette trays so that you

adjusting the burners.
light the burner and set

it to “low”. (all the way

counter- clockwise).