Lucent Technologies merlin messaging system User Manual

Use this procedure if the Schedule Controller is set to follow the Switch mode or to follow both the Switch mode and the Weekly
Business Schedule mode.

(If the Schedule Controller is set to follow the Weekly Business Schedule mode, skip this procedure.)

Perform the appropriate step for the Night Service option programmed on MERLIN MAGIX:

Night Service with Time Set: Program current time on communications system to two minutes before
time set for night mode to go into effect, then wait three minutes for system to go into Night Service
mode

●   

Night Service button: Press button on attendant’s console.

●   

Night Service button on more than one attendant: Press Night Service button at each console

●   

Night Service button password: Press Night Service button on one console and enter the password

●   

Place a call on an incoming line answered by an Automated Attendant

Choose a Selector Code from the Night Main menu

Verify that the correct action (transfer to the appropriate extension, transfer to mailbox, playing of a submenu
or playing of an announcement) will be performed

Repeat this test for each Selector Code on the Night Main menu

Enter 

 at the Main menu and verify that the correct Dial 0 / Timeout action is performed

Repeat for each Automated Attendant

Reset system time to current time, if necessary

Remote Maintenance Device (RMD)
Voice Mail Service
Automated Attendant Service

-

-

-

-

-

 

Verifying Night Service Programming

http://www.sostc.com/lucent/installation/prog_merlin_mess/mmatnt8.htm [2/2/2000 2:33:06 PM]