Lucent Technologies merlin messaging system User Manual
Creating the Group Coverage Ring Delay
The Group Coverage Ring Delay is the number of times a call will ring at an extension without
Personal Coverage but covered by a Calling Group, before the call is sent to an assigned
Calling Group (Group Coverage Receiver). If any Personal Coverage (Primary or Secondary)
is available, the Delay Ring Interval is added to this Ring Delay for a total Ring Delay value.
Personal Coverage but covered by a Calling Group, before the call is sent to an assigned
Calling Group (Group Coverage Receiver). If any Personal Coverage (Primary or Secondary)
is available, the Delay Ring Interval is added to this Ring Delay for a total Ring Delay value.
This procedure is used to specify the number of rings before a call is sent to Group Coverage.
The factory setting is 3 rings.
●
The setting must be identified for each sender extension assigned to the Coverage
Group.
Group.
●
Refer to the communications System Planning Form containing "Group Coverage Ring
Delay" information for site-specific settings.
Delay" information for site-specific settings.
●
Procedure
Creating the Group Coverage Ring Delay
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs3b.htm [2/2/2000 2:33:28 PM]