Cisco Systems 1000 Series Manual De Usuario
19-15
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
show nve vni
show nve vni
To display the network virtualization endpoint (NVE) VNIs configured on the router, use the show nve
vni command in EXEC mode.
vni command in EXEC mode.
show nve vni [interface nve-interface]
Syntax Description
Command Modes
EXEC (#)
Command History
Examples
The following example displays all the NVE VNIs configured on the router:
Router# show nve vni
Interface VNI mcast VNI state
nve1 1010 239.0.0.0 UP
nve2 1110 239.0.0.0 UP
The following example displays the NVE VNIs assigned to NVE interface 1:
Router# show nve vni interface nve1
Interface VNI mcast VNI state
nve1 1010 239.0.0.0 UP
nve1 1110 239.0.0.0 UP
describes the significant fields shown in the display.
Related Commands
interface nve-interface
(Optional) Specifies the NVE interface.
Release
Modification
Cisco IOS XE Release 3.11S
This command was introduced on the Cisco ASR 1000 Series
Routers.
Routers.
Table 19-3
show nve vni Field Descriptions
Field
Description
Interface
The NVE interface.
VNI
The VNI.
mcast
The multicast address for the NVE interface.
VNI state
The state of the VNI.
Command
Description
show nve interface
Displays the NVE interface information.
show nve peers
Displays the NVE peers configured on the router.