Cognitive Solutions A799 Manual De Usuario
Chapter 2: Diagnostics and Configuration
16
Revision D 12/09
A799-PG00001D
Configuring the printer
The configuration menu allows you to select functions or change various settings for the printer. Instructions printed on the
receipt guide you through the processes.
receipt guide you through the processes.
Caution: Be extremely careful changing any of the printer settings to avoid changing other settings that might affect the
performance of the printer.
1
Turn power off to printer.
2
Open the connector cover.
3
Set DIP Switch 1 to ON position (down). DIP Switch 2
should be in the OFF position (up).
4
Make sure receipt paper is loaded in the printer before
proceeding. (For loading instructions, see the A799
User Guide) Make sure cover is closed.
5
Apply power to printer and immediately press and hold
the paper feed button (4) until the configuration printout
begins.
• The printer beeps, prints the diagnostics form and
begins.
• The printer beeps, prints the diagnostics form and
the configuration main menu.
• The printer pauses and waits for a main menu
selection to be made; short clicks are used, except
when answering “Yes” or validating selection (see
sample printout).
when answering “Yes” or validating selection (see
sample printout).
6
To communicate with the printer, you will press the
paper feed button using either short or long clicks.
Use a long click (more than one second) for “yes” and
a short click for a “no.” Follow the printed instructions
to make selections.
Use a long click (more than one second) for “yes” and
a short click for a “no.” Follow the printed instructions
to make selections.
7
Continue through your menu selections until you are
asked, “Save New Parameters?”. Select “Yes” or “No.”
a
a
If you wish to save, select “Yes,” then return DIP
switch 1 to the OFF Postion (up).
b
. Open the receipt cover.
Press and hold the paper feed button while closing
the receipt cover.
• The diagnostic printout verifies your new
settings.
8
If you would like to continue configuring the
printer, select “No.” The printer then returns to the
configuration menu, where you can set parameters
again.
configuration menu, where you can set parameters
again.
���������
����������
���
����������������
������������
�������������������
��
������������
� �
� �
� �
����������
������
�������
�����
�������
�����
�������������������������������
������������
� ���������
�������������
� ����������
�������������
��������
� �����
���
� ����
���
� ������������
��������������
��������
� �����
���
� ����
���
� ������������
��������������
�����������������
� �������
�����������������
� �����������
������������������
� ��������
���������
� ����������
������������
� �
�� ���������������
� �����������������
�����������������
� �����
��������������������
� �����
���������
� ����������
�����������
� �����
���������
� ����
�����
� �������
�����������
� ���������
����������������
� ��������
���������������
��������������
� ����
��������������
� ���������
����������
���������
� ������
���������
� �
��������
� �
������
� ����
������������
� �������
����������������
� ������
����������������� � ��������
�������������������
� ������������������
������������������
�����
�
����
�
���
���������������������
� �������������������
�������������������
����������������
� ���
��������������������
� ��
�������������������������������
��������������������������
�����������������������������������
��������������������������
�����������
���������
������������
�������������������������������
�������������������
������
�� �������
�����������������������������
�� ��������
�����������������������������
�� ��������
�����������������������
�� ��������
�������������������������������� �� ��������
����������������������
�� ��������
����������������
�� ��������
���������������������������������
�����������������������������
�
���������������������������
����������������������������
�������������������������
����������������