Simrad AP26 Manual De Usuario

Installation 

20221586B

 19 

 

Use the wheel to bring the "rudder" to midship position. Turn the 
wheel from lock to lock (H.O. to H.O.) and count the exact 
number of turns. Then start from one lock position and turn the 
half number of turns. 

 

Press AUTO and then STBY. The zero point is now set and the 
display will show: 

 

Follow the operating 
instructions on the following 
pages. There is no further 
need for zero point settings 
until next time you turn the 
autopilot on. 

In the Follow-Up steering mode the course knob may be used to 
set rudder commands. The commanded rudder angle is shown on 
the display and the rudder will move to the commanded angle 
and stop. 

 

Press both buttons 

simultaneously to 

activate Follow-

Up 

Use course 

knob to 

command 

rudder angle 

Commanded rudder angle 10° to 

port. Rudder angle: 4° to port 

and moving. 

 

Return to manual control in Standby by 
pressing the STBY button