GE zem200bf Instruccion De Instalación
11
Step 6
Assemble
trim kit
frame
Assemble
trim kit
frame
Step 7
Install
trim kit
frame
Install
trim kit
frame
Installation
Micr owav e Oven
• Assemble top,
bottom and side
trims with four
screws D, as
illustrated.
trims with four
screws D, as
illustrated.
When assembled,
top, bottom and side
strips must be flush.
top, bottom and side
strips must be flush.
Note: Bottom trim has a hinge
notch and is not
notch and is not
interchangable with top trim.
Caution: Do not overtighten
screws; doing so could cause
screws; doing so could cause
misalignment of top and side
strips.
• Use the assembled frame as a template.
Insert the frame into the cut-out and locate
the attaching holes.
the attaching holes.
• Temporarily hold the frame in place by
starting the four screws that attach the frame
to the base pan and side covers.
to the base pan and side covers.
• Push frame as far left as possible, drive the
four screws.
• Check to be sure door clears the trim when
open.
• Mark the four holes on the side of the trim.
• Remove the frame.
• Center punch and drill 3/32" pilot holes.
• Position the assembled frame around the
• Remove the frame.
• Center punch and drill 3/32" pilot holes.
• Position the assembled frame around the
oven and secure with 8 screws C, using the
smaller Phillips head screwdriver to prevent
burring the Phillips head.
smaller Phillips head screwdriver to prevent
burring the Phillips head.
Screw D
Screw C
Bottom Trim
Screw
Top Trim
Side Trim
Side
Trim
Trim
Screw
Screw
Screw
Wall Installation
Trim Kit Frame
Mark
Mark
Mark
Mark