Citel 6000 Guía Del Usuario
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
105
Login to Alternate Remote Unit (Gateway)
The system administrator can connect to each Remote unit from the PBXgateway through the
“Remote Login” command within the Management Interface (MI). This command allows the
system administrator to access all Remote units for configuration, troubleshooting, and file
transfers.
“Remote Login” command within the Management Interface (MI). This command allows the
system administrator to access all Remote units for configuration, troubleshooting, and file
transfers.
Procedure
1. Access the Main Menu.
2. Press
the
↓ key to select Remote Login and press Enter. A menu will appear displaying the
Remotes that are connected and can be accessed from the PBXgateway.
3. Select the Remote from the list displayed.
Figure 63: Available Remotes
Note: This menu only appears if you run in RVP_IP mode. Otherwise, “Remote Login” just
connects to the corresponding Branch EXTender.
The screen will display:
Connecting………………………, and the Welcome Screen appears for the unit at the alternate site.
Note: You may have to enter the Administrator Password if passwords are used.
The live log window will not automatically update. Press F4 to update the log messages.
You can also do a Gateway login from the Extender by using the same pathway:
Path: Remote -> Gateway Login.
As there is only one Gateway connected to the Remote, no list will appear. You will automatically
access the Gateway welcome screen.