Citel 6000 Guía Del Usuario

 

PBXgateway

™ 

& EXTender

TM

 

6000 System Administrator’s Guide

 

106

 

The EXTender 6000 Branch Office unit utilizes a direct serial connection to provide remote 
user connectivity. This means that the WAN port is plugged directly into a network device. The 
WAN port (WAN 1 or WAN 2) that is used as the main or “primary” port must be identified on 
the RVP_Direct menu.  
 
Note: The WAN port must already be enabled and properly configured (see page 70). 
 

Procedure 
 
1.  Access the Connect Menu from the Main Menu using the following path: 
 

Path: Remote->Configuration->Connect 

 
2.  Set the “Connect Type” to RVP_Direct and access the Menu. 
 

The following menu appears: 

 

3. Press 

the 

→ key to the Primary Interface parameter. This is the main WAN port (usually 

WAN1) that connects the Remote unit to the network device.  

 
4. Press 

the 

→ key to scroll through the choices.  

 
5. Press 

the 

↓ key to the Secondary Interface parameter. This identifies the secondary WAN 

port.  

 
6. Press 

the 

↓ key to the Utilization parameter. This parameter is a numeric value that 

represents the percentage of bandwidth used by the remote unit. See page 144 for more 
information on setting this parameter. This should be left at 100. 

  
7. Press 

the 

← key to accept changes and go back to the Configuration Menu.  

 
8. Press 

the 

↓ key to the Save option. Press Enter.