Citel 6000 Guía Del Usuario

 

PBXgateway

™ 

& EXTender

TM

 

6000 System Administrator’s Guide

 

2 5 8

 

Congratulations on your purchase of the RemoteConneX

TM

 Phone. This Quick Reference Guide will 

assist you when using the office functionality of your phone. 
Important: In order to use the RemoteConneX Phone, you must perform the first use setup procedure 
outlined in the RemoteConneX Phone User Guide!  

1.  Raise the handset, or press the Speaker key. The following menu will appear: 
 

 

 

2.  Press the Login Softkey. 
3.  When prompted to enter your password, enter the password and press the OK softkey. If you do not 

know your password, refer to the ‘Personal RemoteConneX Info’ section or contact your System 
Administrator. A password is optional but highly recommended. 

4.  You are now logged into the system and should be able to see the PBX: Idle Menu. 

 

There are two methods to use your phone for office functionality: 

•  Logging in and staying connected at all times. 
•  Not logging in and using Dialback functionality to make/ receive office calls. 

The Dialback number is the telephone number that the ConneX PBXgateway uses to reach you at your 
home location. Incoming calls to your office extension are routed to the Dialback number currently set. 
Refer to the ‘Personal RemoteConneX Info’ section to find out if you need to set your own Dialback 
number. 

1. From 

the 

PBX: Idle menu, press the Admin softkey. 

2. Press 

the 

SetDB softkey. 

3.  Enter your 10-digit phone number as if you were sitting at your office attempting to call home. Include any prefix 

numbers such as ‘9’ or ‘1’ (i.e 9-1-xxx-xxx-xxxx) when setting the number. 

4. Press 

the 

Enter softkey to store. 

5. Press 

the 

CheckDB softkey to replay.