Citel 6000 Guía Del Usuario
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
2 5 9
Feature Softkeys
Once logged into the system, the following menu will appear:
Timer: 00:07
PBX: Idle
Next
Line 1
DND
Flash
VMail
Admin
Next LN
Cycles through the pool of available lines to answer/retrieve office calls.
Line 1
Selects the first line appearance for use.
DND
Disables Incoming Call notification. If on an active call (DND softkey not available) press
##9. This feature will be retained for the entire connect session; there would be no
indication on the phone.
Flash
Performs a hook flash with home phone line. See the ‘Answering an Incoming Home Call.’
section for more info.
VMail
Allows access to the following voice mail features:
VMLogin Initiate a login to the corporate voicemail system.
VMStat Relays audible status of your voice maibox - “You’ve got voicemail!”
Admin
Allows access to the following administrative features:
Dialback Dials the dialback number currently set. Press PBX softkey to answer call.
SetDB Set the Dialback number.
Check DB Replays the current Dialback number.
Passwd Sets the password.
On/Off Enable/Disable dialback.
Making and Answering a Call
Placing an Office Call
1. Press
the
Line 1 or Next LN softkeys to draw a dialtone. You will enter the PBX: Active Call menu.
2. Dial the phone number of the desired party. Remember that this IS your office phone so you must dial any pre-
fixes needed to make a call from your office (i.e ‘9’).
Ending an Office Call
1. Press
the
HangUp softkey.
2. If using the handset, press the Speaker key before hanging up the handset to keep your RemoteConneX session
active. You will return to the PBX: Idle menu.
Answering an Incoming Office Call...
...At the PBX: Idle Menu
1. You will hear a voice prompt indicating an incoming call.
2. Press
2. Press
the
Next LN softkey to answer the call.
...At the PBX: Active Call Menu
1. Your will hear a stutter tone.
2. Press
2. Press
the
Next LN softkey to answer the incoming call. Your current call will be placed on hold.
3. When completed, press the Next LN softkey again to retrieve the call that was placed on hold.