Citel 4100 Guía De Instalación

IP Single or Dual Port EXTender 4100: Quick Installation Guide

Figure 3: Test Results Window

5. From a PC on the remote network make sure that you can reliably ping the

Remote.

6. From a PC on the corporate network make sure you can reliably ping the

PBXgateway on the remote network.

Optional Configuration Method

There are optional configuration parameters also available to the administrator.

Enabling the Management Browser

The Remote can also be configured via an HTML interface. The Web Server
feature must first be enabled in order to administer the units with this method.

1. Web Server – In order to configure the units using the Management Browser

(MB) the Web Server must be set to “Enabled.”

Path: Remote->Configuration->IP->LAN

2. There must also be a valid IP Address entered for the Remote.

Path: Remote->Configuration->IP->LAN->Address

Additional Management Browser parameters can also be configured either prior
to launching the MB or any time after.

3. Web Timeout – This parameter determines the amount of time a

Management Browser screen can be left idle (no programming activity)
before the session is terminated.

Path: Remote->Configuration->IP

4. Web Refresh LED – The Port Status LEDs update every 10 seconds. If the

frequent updates are found to be a hindrance the LED refreshing can be
disabled.

Path: Remote->Configuration->IP