Citel 4100 Guía De Instalación

 

This section is a quick reference list of the additional configuration steps that can 
be performed either during the execution of the Setup Wizard or anytime after to 
improve system performance. Although not required, the advanced features may 
be used to assist with managing the units or trouble shooting voice issues. 
Please consult the Advanced Configuration section prior to contacting customer 
support. For a full description refer to the System Administrator’s Guide. 

1.  Identify the port by entering a Description for the specific port (typically the 

user’s name). 

Path: Remote->Configuration->Port->Port_1 (and Port_2) 

2.  Setup a Connect password to provide a secure connection restricting 

unauthorized access to the Remote to the PBXgateway. 

Path: Remote->Configuration->Port->Port_1 (and Port_2) 

3.  Set Auto-connect to “enabled” for the sets to automatically connect to the 

PBXgateway. If the link to the PBXgateway is lost for any reason the sets will 
attempt to automatically reconnect. 

Path: Remote->Configuration->Port->Port_1 (and Port_2) 

4.  Enable Active Call Monitoring (Nortel Norstar PBX only) to monitor another 

station’s activity (on another call, for example). 

Path: Remote->Configuration->Port->Port_1 (and Port_2)->Phone Features 

5.  Configure Line Signaling (Nortel Norstar PBX only) – Used to help eliminate 

clicking noise in the audio path on certain installation environments. 

Path: Remote->Configuration->Port->Port_1 (and Port_2) 

6.  Provide a system name making it easier to identify the unit when 

administering multiple Remotes. 

Path: Remote->Configuration->System 

7.  Set the Time and Date to provide accurate time and date stamps for trouble 

shooting and system maintenance 

Path: Remote->Utilities->System->Set Date 

8.  Set an Administrator’s password to restrict access to the Remote’s 

Management Console (MC) 

Path: Gateway->Utilities->System->Set Password 

If the password is lost or forgotten please contact a customer support 
representative at 1-877-248-3587 or 

 for details on how to 

reset the unit’s password. Individual ports are not affected. 

9.  The Administrator assigns the IP Address, Subnet Mask and the Gateway 

Address for each Static Route (if required). 

Path: Remote->Configuration->IP->Static Routes  

 

© Copyright 2007 Citel plc All Rights Reserved