Lexmark Optra T Instruccion De Instalación
Attach Cables
21
Turning on the printer
1
Plug the printer power cord into the connec-
tor as shown.
tor as shown.
2
Plug the other end of the printer power cord
into a properly grounded electrical outlet.
into a properly grounded electrical outlet.
3
Turn the printer power on.
If an error message displays, refer to the
troubleshooting section of the User’s Guide,
available on the Optra T Publications CD.
troubleshooting section of the User’s Guide,
available on the Optra T Publications CD.
Attaching the Operator Panel Overlay
If English is not your preferred language, an over-
lay with translated names for the operator panel
buttons is included with the printer.
lay with translated names for the operator panel
buttons is included with the printer.
1
Peel the protective backing off the overlay.
2
Align the holes in the overlay with the
buttons on the operator panel and press it
into place.
buttons on the operator panel and press it
into place.
3
Rub the overlay firmly to make sure it
adheres securely to the operator panel.
adheres securely to the operator panel.
4
Peel the protective covering away from the
overlay.
overlay.
Operator panel overlay