Lexmark Optra T Instruccion De Instalación

The menu settings page shows current settings for the menus and a list of 
installed options. You can use this page to verify that all printer options are 
properly installed and the printer settings are set to what you want.

Complete “Removing the Print 
Cartridge and Packaging” on 
page 9 before printing a page.

Make sure the printer power is on and the Ready status message 
appears on the display.

On the operator panel, press Menu> or <Menu to enter the menus.

Continue to press and release Menu> or <Menu until you see 
UTILITIES MENU.

Press Select.

Press Menu> until Print Menus appears on the second line of the 
display.

Press Select. 

The message Printing Menu Settings appears on the operator 
panel display until the page prints, then the printer returns to the 
Ready state.

Note: If you receive a message, such as: 

          201 Paper Jam
          Remove Cartridge
refer to the User’s Guide on the 
Publications CD for more information.

Verify that the options you installed are listed on the menu settings 
page under “Installed Features.” 

If an option you installed does not appear on the page, turn the 
printer off, unplug the power cord, and reinstall the option.

If you attached a serial cable, verify that the printer serial settings 
listed on the menu settings page are appropriate for your system.

Locate the Drivers, MarkVision and Utilities CD. 

Follow the instructions in the booklet included with the CD to start 
the printer setup utility appropriate for your operating system.