GatesAir Inc. CZF Manual De Usuario
APEX
™
Exciter Incorporating FLO
™
Technology
Navigating the LCD Display Screens
Built In Tests
Page: 3-32
888-2604-001
03/08/07
WARNING: Disconnect primary power prior to servicing.
3.5
Built In Tests
BuiltInTests.bmp
Figure 3-30 Built In Tests Screen
The BIT (built in tests) soft key is found on the right side of the System Status screen,
shown in Figure 3-5. When the BIT soft key is pressed, see Figure 3-30, a sub window
appears. The message in this window is “Starting BIT requires exciter to be muted.” If the
Ok soft key is pressed, the exciter RF output is reduced to zero. If the cancel soft key is
pressed the exciter continues to function in the previous mode. When the Built In Test
screen is exited, the exciter operation resumes in its previous mode.
shown in Figure 3-5. When the BIT soft key is pressed, see Figure 3-30, a sub window
appears. The message in this window is “Starting BIT requires exciter to be muted.” If the
Ok soft key is pressed, the exciter RF output is reduced to zero. If the cancel soft key is
pressed the exciter continues to function in the previous mode. When the Built In Test
screen is exited, the exciter operation resumes in its previous mode.
3.6
Details of the System Setup Screens
SystemSetup.bmp
Figure 3-31 System Setup Screen
This section provides pictures and details of the series of exciter setup screens. Section 3.3
on page 3-4 provides general information about interconnecting structure of the screens.
on page 3-4 provides general information about interconnecting structure of the screens.