GatesAir Inc. CZF Manual De Usuario
APEX
™
Exciter Incorporating FLO
™
Technology
Details of the System Setup Screens
Navigating the LCD Display Screens
26
04s30
0.fm
03/08/07
888-2604-001
Page: 3-33
WARNING: Disconnect primary power prior to servicing.
If the User Setup is locked, all setup functions and the exciter power raise and lower
functions will be locked and their various setup screen selection values will be greyed out.
Only the Exciter Setup screen Frequency and Frequency Offset functions and the change
Diagnostics password will be available.
functions will be locked and their various setup screen selection values will be greyed out.
Only the Exciter Setup screen Frequency and Frequency Offset functions and the change
Diagnostics password will be available.
Refer to Figure 3-31. Touching any of the eight boxes on the System Setup screen brings
up the setup sub screen for that area, see Table 3-2 to find the page numbers for the sub
screens. Within any of these screens, touching Home returns to the main screen, touching
back returns to the System Setup screen, and touching Fault (at the bottom of the screen,
visible only if a fault exists) brings up the System Status screen. See Figure 3-2, on page
3-5 for a view of the exciter LCD display flow chart.
up the setup sub screen for that area, see Table 3-2 to find the page numbers for the sub
screens. Within any of these screens, touching Home returns to the main screen, touching
back returns to the System Setup screen, and touching Fault (at the bottom of the screen,
visible only if a fault exists) brings up the System Status screen. See Figure 3-2, on page
3-5 for a view of the exciter LCD display flow chart.
When a numeric entry is needed, touching that entry causes a numerical touch pad to be
displayed. This pad has numbers from 0 to 9, a decimal point, and a +/- selection.
An alpha numeric key pad is displayed when a title is needed.
displayed. This pad has numbers from 0 to 9, a decimal point, and a +/- selection.
An alpha numeric key pad is displayed when a title is needed.
3.6.1
Restore Defaults Operation
Main Screen > Setup > System Setup screen Restore Defaults soft key function effects the
following screens and values listed below.
following screens and values listed below.
The Restore Defaults soft key function is locked under the factory setup, this is not a
normal field operation.
normal field operation.
Table 3-2 Location of System Setup Sub Screens
Choice Location
Exciter
RTAC Filters
Display
External I/O
Serial I/O
FLO FPGA
Change Passwords
User Setup:
Diagnostics Setup:
Factory Setup:
Restore Defaults
Table 3-3 Settings Resulting From Restore Defaults Activation.
Name
Restore Defaults Setting Normal Setting
User Setup
Unlocked
Customer’s choice
Diagnostics Setup
Unlocked
Customer’s choice
Factory Setup
Locked
Customer’s choice
User password
harris
Customer’s choice
Diagnostic Password
harris
Customer’s choice