Wr Rademacher DuoFern 14234511 Wireless blind cord winder Flush mount 14234511 Hoja De Datos
Los códigos de productos
14234511
19
EN
12. Mounting the RolloTron Standard DuoFern
Mount the RolloTron Standard DuoFern as straight as pos-
sible, so that the belt can wind correctly.
Ensure that the RolloTron Standard DuoFern sits freely in
Ensure that the RolloTron Standard DuoFern sits freely in
the belt box and that it is not in contact with the masonry,
otherwise noise will be generated during operation.
1.
Slide the RolloTron Standard DuoFern into the belt box
and screw it tight using the screws provided.
IMPORTANT
Ensure that the connecting cable is laid correctly inside
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Slide the enclosed cover plate over the lower mounting
holes.
i
3.
Commissioning
◆
Re-insert the mains plug into the 230 V / 50 Hz socket.
This completes the installation process.
IMPORTANT
The mains socket and plug must be easily accessible at
The mains socket and plug must be easily accessible at
all times.