Wr Rademacher DuoFern 14234511 Wireless blind cord winder Flush mount 14234511 Hoja De Datos
Los códigos de productos
14234511
33
EN
24. Removing the RolloTron Standard DuoFern (e.g. in the event of a move)
1.
+
+
+
Erase all settings.
Simultaneously press and
hold the buttons for 4
seconds.
2.
Fully close the roller shutters.
Keep the button held down.
3.
In doing so, pull out the belt as far as possible from
the top of the RolloTron Standard DuoFern.
4.
Remove the cover plate from the lower mounting
holes.
◆
You can remove the front panel by gripping the
small notch in the lower side of the device.
5.
Subsequently release the fastening screws and pull
the RolloTron Standard DuoFern completely out of
the belt box.
6.
Remove the belt compartment cover.
STOP
There is a risk of injury
from the reel.
◆
Never reach into the reel compartment when the
motor is running. Always remove the mains plug
before touching the reel compartment.
i