Wr Rademacher DuoFern 14234511 Wireless blind cord winder Flush mount 14234511 Hoja De Datos
Los códigos de productos
14234511
35
EN
25. Removing the belt in the event of unit failure
In the event that the RolloTron Standard DuoFern unit fails
and the motor no longer runs, you can use the disengaging
bracket provided in order to fully remove the belt from the
belt winder unit, without the need for cutting it.
1.
Remove the mains plug from the socket.
2.
Dismantle the RolloTron Standard DuoFern as previ-
ously demonstrated on page 33.
3.
Release the drive with the help of the supplied disen-
gaging bracket.
ATTENTION
ATTENTION
◆
Hold on to the belt tightly, as otherwise the roller shut-
ters may slam shut.
◆
A small amount of resistance must be overcome when
pressing.
4.
Maintain pressure on the disengaging bracket and pull
the belt out of the RolloTron Standard DuoFern as far
as possible.
5.
Release the belt from the fastening hook and pull it
out completely from the RolloTron Standard DuoFern.
6.
Place the disengaging bracket back in its holder.
RolloTron
Standard
DuoFern
RolloTron
Standard
DuoFern
Plus
i
Drive release
Storage bay
Drive release