Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Siemens
  4. eWON4002
  5. Manual De Usuario

Siemens eWON4002 Manual De Usuario

Descargar
Página de 38
page 18 of 35
ver 2.04
 5.6.2 Relays
The 2 relays are on the RL1-RL2 connector.
 5.7 Analog Inputs
There are 6 Analog Inputs available, 4 of them are configurable in 0-10V or 0-20mA, the 2 others are PT100 Inputs.
 5.7.1 Configurable standard Analog Inputs (AI1 - AI4)
The selection of Analog Input range is done by a dip switch located above the Analog Inputs connector (rear switch):
Figure 12: Rear switch panel and label (the label stands on the left side from the eWON
®
)
• To configure a channel to voltage input, place the matching switch to OFF.
• To configure a channel to current input, place the matching switch to ON.
Specification
Value
Number of outputs
2
Type of output
SPST NO relays (Single Pole, Single Throw, 
Normally Open)
Input voltage max
24 VDC/24 VAC
Max current (external source)
1A
Isolation
1 kV
Pinout connector
See label and appendix (