Datalogic Scanning M8300 Manual De Usuario

POWERSCAN

®

 D8330/M8300 

The LED control escape sequences are intended to activate the LEDs for short 
periods of time and can be used in combination with the Beeper. The LED and 
Beeper will be controlled by the system after the entire command sequence is 
interpreted. 

 

Example: 

 

ESC [ 6 q ESC [ 3 q ESC [ 7 q  Turns on the green LED, emits a good read tone, and 

turns off the green LED. 

 

ESC [ 6 q ESC [ 5 q ESC [ 7 q  Turns on the green LED for 100 ms and then turns off 

the green LED. 

 
 

 

Set date to day, month, year 

Set time to hours, minutes; seconds are 
automatically set to 00. 

 
 

 
The PowerScan

®

 M8300 series scanners with display have 3 command keys that can 

each be associated with a character to send to the host. 
 
By pressing the keys on the scanner, the associated character with its relative 
message formatting is sent to the Host. For example, keys can be used to select 
items from a menu sent to the scanner display by the application program. 

 

The general format is: 

[Header] [Scanner_Addr] [Scanner_Addr_delimiter] ] [Cradle_Addr] [Cradle_Addr_delimiter]  
[Time stamp] [Ts_delimiter] [Code ID] [Code Length] KeyID [Terminator] 

 

[Items in square brackets are optional.] 

 
The messages are handled by the system as if they were barcodes, that's why KeyID 
can have so many fields appended to it. If in your application there is some chance of 
reading a 1-char barcode identical to KeyID, the way you can distinguish between 
the two is to enable the Code ID: The KeyID is the only 1-character long EAN 8 
code. 
 
Refer to par. 5.3 for a compete description of the optional message fields in square 
brackets.