Honeywell VRX180 Manual De Usuario
Setpoint Profiler
Video Recorder – User Manual
189
Parameter name
Definition
Triggered
by
by
Conditions
present
present
Result
GUARANTEED
SOAK
SOAK
Level ON
Excessive
deviation
between
profiler and
PV #1 or PV
#2 & the
segment’s
GUAR SOAK
#1 or GUAR
SOAK #2 is
enabled.
deviation
between
profiler and
PV #1 or PV
#2 & the
segment’s
GUAR SOAK
#1 or GUAR
SOAK #2 is
enabled.
Profiler is
put on Hold
put on Hold
HOLD
LEVEL/EDGE
LEVEL/EDGE
EDIT
Grants access to the profile’s segments
edition page, see table 5-5.
edition page, see table 5-5.
5.4 How to set up a profiler
Up to 4 profilers can be programmed, depending on the options on your instrument. There are two
menus for programming a profiler: PROGRAM PROFILERS in the Program menu, and SETPOINT
PROFILES in the Online menu. Both must be accessed to program a profiler. Both menus are
described in this section.
menus for programming a profiler: PROGRAM PROFILERS in the Program menu, and SETPOINT
PROFILES in the Online menu. Both must be accessed to program a profiler. Both menus are
described in this section.
Program Profilers menu (in Program mode)
This menu lets you define various parameters for controlling the profiler’s execution. To access the
Program Profilers menu:
Program Profilers menu:
1. Press the Menu button until a main menu is displayed.
2. Select Set Mode and change the mode to Program.
3. Select Program Profilers.
4. Select a profiler (#1 through #4) to program. Only profilers that are not actively running are
selectable.
Table 5-3 briefly describes the prompts for all profilers. For detailed descriptions, refer to Sections 5.2
and 5.3. See Table 4-2 for additional prompts.
and 5.3. See Table 4-2 for additional prompts.