Honeywell VRX180 Manual De Usuario

This menu lets you define profile ramp and soak segments and associated parameters, and store and 
load programs to and from floppy disk or memory. See Figure 5-13 for allowable and non-allowable 
storage. 

To access the Setpoint Profiles menu: 

1.  Press the Menu button until a main menu is displayed. 

2.  Select Set Mode and change the mode to Online. 

3.  Select Setpoint Profiles. 

4.  Select a profile (#1 through #4) to program. 

Table 5-5

, 

Table 5-6

 and describe the Setpoint Profile prompts.   

 

Table 5-4 Setpoint Profiles Prompts 

EDIT PROFILE #1 

EDIT PROFILE #2 

EDIT PROFILE #3 

EDIT PROFILE #4 

 

Select a profile to edit.  See Table 5-5 for 
prompts. 

STORE PROGRAM TO 

DISK 

STARTING PROFILE # 

Select 1-4. 

Select the lowest numbered profile to be 
stored; that is, Profile 1, 2, 3, or 4.  See How 
programs are stored on a disk on page 200 
for details. 

 

NUMBER OF PROFILES 

Select 1-4. 

Number of profiles (1, 2, 3, or 4) determines 
how many profiles will be stored, starting with 
the Starting Profile #.  For example, if Starting 
Profile # is 1 and Number of profiles is 3, 
then Profiles 1, 2, and 3 are stored.  See How 
programs are stored on a disk on page 200 
for details. 

 FILE 

Select the filename and number.  Filename 
extension is .LNS.  After you select the 
number and press Enter, the profile(s) are 
stored to disk. 

 

FILES ON DISK 

Lists all files on the disk. 

STORE PROGRAM TO 

MEMORY 

PROGRAM NUMBER 

 

Select 1-12. 

There are up to 96 “slots” allotted for profile 
memory storage.  Depending on how many 
profiles your instrument has, each program 
will contain a certain number of profiles.  See 
How programs are stored to memory on page 
198 for details.  

 

STORE PROGRAM TO MEMORY 

Select this to store program to memory.