Crown Audio I-T5000 HD Manuel D’Utilisation

Crown and JBL engineers have designed I-Tech HD DSP presets that are 
opti mized for various JBL loudspeakers, such as Vertec Line Arrays. To use 
them, follow this procedure in System Architect:
1. Go to the I-Tech pages at www.crownaudio.com.
2. Select Downloads.
3. Click on the fi le of your choice. It will download to your computer.
4. In System Architect, see the Help fi le on Presets for details on downloading 
the pre set to an I-Tech HD amplifi er. Basically, you will open and engage a data 
frame. The fi le will overwrite the preset you designate. Another option, 
described on the next page, is to transfer the preset fi le using a USB drive.
5. Recall the preset from the LCD Control Screen. Then your amp will be 
confi gured to work with the specifi ed loudspeaker model.

Section 4.8.19  describes the Presets Manager screen in System Architect.

Your I-Tech HD amplifi er has a wide variety of onboard Digital Signal 
Process ing (DSP). Some applications for this DSP are speaker confi guration 
(set ting the drive levels, frequency bands, delays and limiting for your 
particular speakers), EQ, fi ltering, compression, and much more. Those 
functions are described in Section 4.6. System Architect software lets you 
adjust the DSP settings, such as fi lter slope, compression ratio, EQ frequency 
bands, and so on.

A preset is a group of DSP settings that confi gure the amp for a specifi c 
application. For example, you might use one preset that optimizes the amp’s 
DSP for a JBL Vertec Line Array. You might use another preset that sets up the 
DSP for a stereo pair of loudspeakers of your choice. You can choose any of 
50 presets with the LCD Control Screen.

Preset 1 is the factory default  preset and cannot be overwritten. It sets up the 
amplifi er for stereo operation with no DSP.

The I-Tech HD amplifi er works with two types of presets:
1. User presets. Using System Architect, you can create your own custom 
DSP presets, label them, and send them to the I-Tech HD ampli fi er. The amp 
stores those presets in fi rmware. You can recall those presets from the LCD 
Control Screen. 
2. Downloadable presets. Crown and JBL engineers have designed 
presets that are optimized for various JBL loudspeakers, such as Vertec Line 
Arrays. You can download presets from the I-Tech pages in the Crown website 
www.crownaudio.com. Then in the software, or with a USB drive, send the 
preset fi les to the I-Tech HD amplifi er, where you can recall them from the LCD 
Control Screen.

We will describe each type of preset in detail.

User presets are DSP presets that you set up. This is the basic procedure:
1. Adjust the DSP settings as desired in the System Architect soft ware (not 
with the LCD Control Screen).
2. Save this group of settings as preset. Give it a label.
3. Download the preset to the I-Tech HD amplifi er. See the software Help fi le 
for details. As soon as you save the setting as a preset, it is sent to the 
amplifi er. Another option, described on the next page, is to transfer the 
preset fi le using a USB drive.
4. Select that preset from the LCD Control Screen. The preset will 
automat ically set the DSP parameters as you set them up in the control 
software.

Setting some parameters of the DSP in the I-Tech HD amplifi er is done using 
the control software, not by the amplifi er’s LCD Control Screen. For example, 
if you want to set fi lter Q, compression ratio, or graphic EQ, you would do so 
within the System Architect software.

5. When you want to recall the preset, select it from the Preset screen in the 
LCD display. The preset will automat ically set the DSP parameters as you set 
them up in the control software.