TP-LINK TL-WR740N Manuel D’Utilisation

 

-75- 

2.  Enter the following data: 

¾

 

Destination Network - The Destination Network is the address of the network or host that 

you want to assign to a static route. 

¾

 

Subnet Mask  - The Subnet Mask determines which portion of an IP Address is the 

network portion, and which portion is the host portion. 

¾

 

Default Gateway - This is the IP Address of the gateway device that allows for contact 

between the Router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to make the entry take effect. 

Click the Delete button to delete the entry. 

Click the Enable All button to enable all the entries. 

Click the Disable All button to disable all the entries. 

Click the Delete All button to delete all the entries. 

Click the Previous button to view the information in the previous screen, click the Next button to 

view the information in the next screen. 

Choose menu “Advanced Routing → System Routing Table”, and then you can view the 

System Routing Table in the next screen (shown in Figure 4-77). System routing table views all of 

the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface 

will be displayed for each entry. 

 

Figure 4-77  System Routing Table 

¾

 

Destination Network - The Destination Network is the address of the network or host to 

which the static route is assigned.   

¾

 

Subnet Mask - The Subnet Mask determines which portion of an IP address is the network