TP-LINK TL-WR740N Manuel D’Utilisation

 

-76- 

portion, and which portion is the host portion.   

¾

 

Gateway - This is the IP address of the gateway device that allows for contact between the 

Router and the network or host.   

¾

 

Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN 

(internal wired and wireless networks), or on the WAN (Internet). 

 

Figure 4-78 Bandwidth Control 

There are two submenus under the Bandwidth Control menu as shown in Figure 4-78: Control 

Settings and Rules List. Click any of them, and you will be able to configure the corresponding 

function. The detailed explanations for each submenu are provided below. 

Choose menu “Bandwidth Control → Control Settings”, and then you can configure the 
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should 
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type 
and ask your ISP for the total bandwidth of the egress and ingress.

 

 

Figure 4-79 Bandwidth Control Settings 

¾

  Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take 

effect. 

¾

  Line Type - Select the right type for you network connection. If you don’t know how to choose, 

please ask your ISP for the information. 

¾

  Egress Bandwidth - The upload speed through the WAN port

.

¾

  Ingress Bandwidth - The download speed through the WAN port.