Actron 9640 Manuel D’Utilisation

✓

Due to different processor calibrations used, the function list for a

particular vehicle may or may not appear as shown. Based on the vehicle

information entered at the Vehicle Setup menu, the tool recognizes the

computer system installed.

✓

If an Error Message displays, make sure the adapter cable is securely

attached, and the ignition key is ON. Cycle the ignition key to OFF for 10

seconds, then ON. This may be required to reset the computer. If required,

select YES to try again. If the problem still exists, refer to “Error

Messages” on page 9-2. 

✓

This section covers Chrysler vehicles manufactured from 1989 to 2001. 

Chrysler vehicles manufactured from 2002 to present automatically use 

Global OBD II Diagnostics. 

Instructs the user what section of the manual to use. This section covers 

Chrysler Diagnostics.

The Read Codes function enables the tool to retrieve and display any specific 

emission-related Diagnostic Trouble Codes (DTC) stored in vehicle’s memory. 

This function can be performed KOEO or KOER. 
Select Read Codes from the Chrysler 

Functions list and press 

ENTER.

Perform the following. 

1) Set Parking Brake
2) Turn Key On-Engine Off or Running.
3) Put Transmission In Park Or Neutral.

If no DTCs have been stored in vehicle’s 

memory, a System Pass screen dis-

plays.

If not, press the 

DOWN arrow to view the 

DTCs.

Chrysler Functions ?
` 1)Read Codes

2)Read Temp Codes [
3)Erase Codes    ~

System Pass:
No Faults Detected.

 

~

Use S To View Code.

Write Down Codes
For Reference

 

 ~