Actron 9640 Manuel D’Utilisation

Use the 

UP/DOWN arrow keys to scroll 

through the codes. Write down the 

codes for reference or print them later. 

The DTCs are categorized by ENG (engine) or TRANS (transmission). The 

Chrysler MIL code (3-digit) and SAE code (5-digit) follow on the first line. 

There may be times where only one or both display. Dashes display if the DTC 

type does not exist.

✓

For JTEC and SBEC III Equipped Vehicles Only.

The Read Temp Codes (Read Temporary Codes) function is used on vehicles 

equipped with Jeep and Truck Engine Controllers (JTEC) and SBEC version III 

modules. The function enables the tool to retrieve and display all DTCs that 

failed one trip but did not turn on the MIL light. If the vehicle does not support 

this function, then the tool will not display it.
Select Read Temp Codes from the 

Chrysler Functions list and press 

ENTER.

Next, turn the ignition key On-Engine can be Off or Running. 
Once the tool has completed reading the temporary DTC s, one of two screens  

display:

ENG:  31/P0443
EVAP Purge Solenoid
Circuit

~

ENG:  31/P0443
EVAP Purge Solenoid
Circuit

~

TRANS:  18/P1792
Battery

]

Disconnected

[

(In Last 50 Cycles) ~

ENG:  7/----
Boost Limit
Exceeded

~

ENG: ---/P0010
Camshaft Position

]

Actuator A - Bank 1[
Circuit Malfunction ~

Chrysler Functions ?

1)Read Codes

` 2)Read Temp Codes [

3)Erase Codes    ~

Use S To View Code.

Write Down Codes
For Reference

 

 ~

System Pass:
No Faults Detected.

 

~