Actron 9640 Manuel D’Utilisation

Use the 

UP/DOWN arrow keys to scroll 

through the codes. Note the codes and 

press 

FUNC to return to the Chrysler 

Functions list.

Use the 

UP/DOWN arrow keys to scroll 

through the codes. Write down the 

codes for reference or print them later. 

The DTCs are categorized by ENG (engine) or TRANS (transmission). The 

Chrysler MIL code (3-digit) and SAE code (5-digit) follow on the first line. 

There may be times where only one or both display. Dashes display if the DTC 

type does not exist.

Note the codes and press 

BACK to return to the Chrysler Functions list.

The Erase Codes function deletes the DTCs from the vehicle’s computer mem-

ory. Perform this function only after the systems have been checked completely 

and DTCs have been documented. This function should be performed KOEO.  

Do not START engine.
After servicing the vehicle, erase the stored DTCs, perform a road test, and then 

verify no new codes have been stored. If DTCs return, the problem has not been 

corrected or other faults are present. 
Select Erase Codes and press the 

ENTER key. 

Follow the instructions and press 

ENTER.

ENG:  14/P0107
MAP Voltage Too
Low

~

ENG:  31/P0443
EVAP Purge Solenoid
Circuit

~

ENG:  31/P0443
EVAP Purge Solenoid
Circuit

~

TRANS:  18/P1792
Battery

(In Last 50 Cycles) ~

ENG:  7/----
Boost Limit
Exceeded

~

ENG: ---/P0010
Camshaft Position

]

Actuator A - Bank 1[
Circuit Malfunction ~

Chrysler Functions

1)Read Codes
2)Read Temp Codes [

` 3)Erase Codes

~

Turn Ign Key On.
 Engine Must Be Off
 To Erase Codes.
Press ENTER To Cont~