Bunn 41343 Manuel D’Utilisation

Page 28

  This function allows the operator to set an initial 

soaking of the grounds and a delay time, before the 

complete brew cycle starts.

NOTE: If the brewer is already in the SET PREINFUSION 

screen, it is not necessary to follow steps 1 through 9 

in this section, but proceed directly to step 10.

1.  Press and hold the upper right hidden switch until 

the display reads UNITS. Release switch. Press 

and release upper right hidden switch until the 

display reads REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read NO-NAME LEFT, along with MODIFY, SHOW 

and NEXT.

3.  Press and release NEXT to advance to the desired 

coffee name to be modified.

4.  Press and release MODIFY. The display should  

now read BREW OZ. 

5.  Press and release DONE. The display should now 

read 3 BATCHES DONE?.

6.  Press and release YES. The display should now 

read % BYPASS. 

7.  Press and release DONE. The display should read 

3 BATCHES DONE?.

8.  Press and release YES. The display should now 

read SET PULSE BREW. 

9.  Press and release NO. The display should now 

read SET PREINFUSION. 

10. Press YES to proceed. The display should now 

read ON TIME and a batch light will be blinking.

11. Select the batch to be modified.

12. Using (-) and (+), set the amount of time the brew 

water will initially presoak the grounds for that 

particular batch size. 

13.  When finished, press another batch size and repeat 

until all three batch sizes are set.

14. When finished, press DONE. The display should 

now read OFF TIME and a batch light will be blink-

ing.

15. Using (-) and (+), set the amount of time the brew 

cycle will delay (after the presoak cycle shuts off) 

before resuming brewing.

16.  When finished, press another batch size and repeat 

until all three batch sizes are set.

17. When finished, press DONE. The display will show 

the ON and OFF TIMES that were entered for each 

particular batch size.

18. After a 5 second delay, the display should read 

3  BATCHES DONE?. If the three batches are not 

complete, press NO in order to return to SET 

PREINFUSION,  and repeat steps 10 through 14.

19. If the three batches are done, press YES. This will 

advance to the next function, SET DRIP TIME.

20. Press and release either ON/OFF switch located 

on the front switch panel to exit the PreINFUSION 

function and return to the MAIN SCREEN.

EXIT TO

NEXT FUNCTION

SCREEN

REVIEW RECIPES?

 NO 

YES

EXIT TO

NEXT FUNCTION

SCREEN

NO-NAME LEFT

MODIFY SHOW NEXT

NO-NAME

MODIFY SHOW NEXT

DUAL

BREWERS

SINGLE

BREWERS

BREW OZ. XX.X

 (-) DONE (+)

3 BATCHES DONE?

 NO 

YES

% BYPASSS XX.X

 (-) DONE (+)

SET PreINFUSION?

 NO 

YES

3 BATCHES DONE?

 NO 

YES

SET PULSE BREW?

 NO 

YES

ON TIME:  X:XX

 (-) DONE (+)

OFF TIME:  X:XX

 (-) DONE (+)

3 BATCHES DONE?

 NO 

YES

41343 080108