Jacuzzi J-345 Manuel D’Utilisation

32

The jets pump 1 activates during the secondary filtration to provide 

additional skimming. The spa is programmed with a default setting of 

SF0 but can be programmed to any of the cycle settings listed below, 

Figure 5. These cycles schedule the jets pump 1 to run for a preset 

amount of time per day, in addition to normal operation.

Note: During the secondary filtration the jets pump 1, circulation pump 

and CLEAR

RAY are activated.

No filtration

10 minutes of filtration every 12 hrs

10 minutes of filtration every 8 hrs
10 minutes of filtration every 6 hrs

To make changes to the Secondary Filter Cycle, follow the steps below.

A.  Press the 

Menu ( 

 ) button twice to display the Secondary 

Filtration Cycle Menu. The LED screen will display “SF.”

B.  Press the 

Warmer (   ) button to prepare the system for changes. 

The LED will display the last cycle programmed and will blink once to 

indicate the system is ready to accept changes.

C.  Press the 

Warmer (   ) or Cooler (   ) button to scroll through the 

cycles, SF0 to SF3 (Figure 6).

D.  Once a cycle is selected, press the 

Jets Pump 1 ( 

 ) button to 

confirm the selection. You must press the 

Jets Pump 1 ( 

 ) button 

to confirm your selection or the current settings will remain active.

E.  The display will show the new cycle selected and it will blink twice to 

indicate that the change has been accepted.

Note: If no button is pressed within 5 seconds of each selection the 

screen will revert back to the Main Menu and the current settings will 

remain active.

Figure 5

Will return to 

“SF” menu

◄

◄

◄

◄

Figure 6