Output Solutions ez-1000plus Mode D'Emploi
2-2. Label Installation
1.
Open the top cover by
pressing the Cover
Open Buttons on both
sides.
pressing the Cover
Open Buttons on both
sides.
2.
Place the label roll onto
the Label Roll Core.
the Label Roll Core.
3.
Loosen and lift the
upper print mechanism
by pressing the locking
tenons.
upper print mechanism
by pressing the locking
tenons.
4.
Feed the label through
the two Label Guides to
the Tear-off Bar.
the two Label Guides to
the Tear-off Bar.
5.
Align the label guides to
the label edge.
the label edge.
6.
Close the upper print
mechanism from the
top to finish label
installation.
mechanism from the
top to finish label
installation.
EZ-1000 Plus User’s Manual Rev. B
16