Output Solutions ez-1000plus Mode D'Emploi

When installing cord tags, the tag hole must align 
with the sensor arrow (as indicated in figure), then 
use the Label Guide to secure the tags. 
 

Tag hole position

 

                                   

Sensor Detection Position       

 

   

Sensor 

1. 

Please make sure the printer is powered off. 

2. 

Take the power cable, plug the cable switch to the power socket, and then connect the 
other end of the cable to the printer power socket. 

3. 

Connect the cable to the USB/parallel port on the printer and on the PC. 

4. 

Power on the PC and the printer and the printer’s LED light will shine.     

 
 

 

 
 

EZ-1000 Plus User’s Manual Rev. B 
 

18